How to determine the environmental concrete batching equipment

Mixing plant building in the grounds of concrete batching plant, aggregate venues,

transport workshop and ancillary works such as reservoirs, living and office rooms,

power distribution room etc.. Concrete batching plant JS750B 2 mixer, equipped with

the appropriate equipment leather belt conveyors, belt conveyor aggregate PL1600 four

positions batching machine, concrete batching machine plant protection concrete supply

requirements such. From concrete batching machine plant inside a warehouse and

admixtures, tanks, stirred building mixing machinery, 60m3 per hour can produce

concrete meet the construction requirements.
How to determine the environmental performance of concrete batching equipment is

good or bad?
1, it is able to produce high-performance concrete. The high-function concrete contains a high strength, high durability and high workability.

This requires mixed concrete batching equipment machinery station, the car, the pump

has a good adaptability and reliability;
2, commercial concrete production site to create a green, environmentally friendly and

civilized premise, create soft greening rate environment in more than 35% of the garden-style units;
3, mixed concrete batching plant dust emissions. The largest stockyard and batching

devices at the application a full blockade-hopper agitation over the host should have a

high-precision suction device;
4, concrete batching plant apparatus mixer truck, the aggregate can be recycled after

the cleaning of the pump, and pump and dosing machine, the washing water can also

be recycled or re-neutralization treatment and then use do high alkaline water zero emissions;

Our main products are as follows:

Concrete batching plant

(HZS25 / HZS35 / HZS50 / HZS60 / HZS90 / HZS120 / HZS180),

JS series twin shaft concrete mixer:

(JS500 / JS750 / S1000 / JS1500 / JS2000 / JS3000 / JS4000,

small concrete mixers,)

Portable concrete mixer

(JZC350 / JZM350 / JZC500 / JZM500 / JZC750 / JZM750).
Selling is not the end, but the beginning of the service.

About service, we are more attentively; about Quality,

we are more reliable; about smile, we are more sincere.

Any question or request in this filed, welcome to contact us freely.

We sincerely welcome friends from all walks of life to visit our company

and create a glorious tomorrow hand in hand.

please view our site：http://www.onway.co

Tags: Concrete Mixer, Mobile concrete mixer, Portable concrete mixer,

Small Concrete Mixer

How to determine the environmental concrete batching equipment

Concrete mixer in the course of their work often generate noise, this noise

make people feel uncomfortable, which not only makes the staff feel uncomfortable

but also affect the health of our bodies, how to reduce the noise of the concrete

mixer? Here we teach you some ways to reduce concrete mixer unusual noise
1 based on past production experience, listening to the sound should be more

or less able to judge the sound source
2 new machines installed at the venue after the test machine, generally have

the manufacturer's installation accompanied they personally detection equipment

on the safety of this has nothing to do with the rotating part
3 new and old equipment when used together, need to pay attention to whether

the old equipment with new equipment coordination, emphasis will be resonance
Installation of anchor bolts are in place, the foundation is solid, you should do

these things in the beginning of the installation of the equipment.

Our main products are as follows:

Concrete batching plant

(HZS25 / HZS35 / HZS50 / HZS60 / HZS90 / HZS120 / HZS180),

JS series twin shaft concrete mixer:

(JS500 / JS750 / S1000 / JS1500 / JS2000 / JS3000 / JS4000,

small concrete mixers,)

Portable concrete mixer

(JZC350 / JZM350 / JZC500 / JZM500 / JZC750 / JZM750).
Selling is not the end, but the beginning of the service.

About service, we are more attentively; about Quality,

we are more reliable; about smile, we are more sincere.

Any question or request in this filed, welcome to contact us freely.

We sincerely welcome friends from all walks of life to visit our company

and create a glorious tomorrow hand in hand.

please view our site：http://www.onway.co

Tags: Concrete Mixer, Mobile concrete mixer, Portable concrete mixer,

Small Concrete Mixer

How to reconfigure the concrete batching plant

Recently, Our customers consult concrete batching plant migration problems.

For some clients, concrete batching plant has used for many years. But with the development of the 

enterprise, close projects have completed one after the other, and remote projects are increasing. So it is 

need to transfer the concrete batching plant to the new engineering base.

Firstly, clients need to disconnect the concrete batching plant. It is the same important to disconnect the 

concrete batching plant as to install the concrete batching plant. It also requires a lot of preparations. So 

how to do the preparatory work?

Here are some tips to how to disconnect the concrete batching plant:

1.Find a hard and flat foundation around the site, ensuring the foundation has high voltage wire obstacle 

and is far away from ditches.

2.Check all the security tools are perfect. Clean the construction site to keep enough space.

3.Clean up the litter of batching plant and cement silo. Note: Cut water, gas and electric facilities when 

clean up.

4.Remove electrical, water, admixture and compressed air pipings.

5.Gradually remove all parts of concrete batching plant.

6.Check all equipments of concrete batching plant to ensure that all equipments are complete, flawless 

and perfect.

Demolition should be done by professional person.

Before re-installation, lay a good solid foundation to ensure the stability of concrete batching plant.

Hope these suggestions are helpful to you and hope you have a nice day!

Our main products are as follows:

Concrete batching plant (HZS25 / HZS35 / HZS50 / HZS60 / HZS90 / HZS120 / HZS180),JS series twin shaft concrete mixer: (JS500 / JS750 / S1000 / JS1500 / JS2000 / JS3000 / JS4000, small concrete mixers,)Portable concrete mixer(JZC350 / JZM350 / JZC500 / JZM500 / JZC750 / JZM750).
Selling is not the end, but the beginning of the service. About service, we are more attentively; about Quality, we are more reliable; about smile, we are more sincere.

Any question or request in this filed, welcome to contact us freely. We sincerely welcome friends from all walks of life to visit our company and create a glorious tomorrow hand in hand.

 please  view our site：http://www.onway.co

Tags: Concrete Mixer, Mobile concrete mixer, Portable concrete mixer, Small Concrete Mixer

How to deal with waste------Concrete batching plant

Concrete batching plant wastes and its recyclable value

With the wide application of commercial concrete, concrete batching plant products large amount of concrete to meet this requirement. However, when concrete batching plant products concrete, it also results in producing a large number of residue and waste water.

Since there is no technology to deal with waste concrete of concrete batching plant, and cleaning waste substantial number of concrete not only wastes concrete resource, but also makes serious pollution to the environment. Waste concrete of concrete batching plant has low comprehensive utilization rate and treatment rate. Most waste concrete is piled up in open air.

Environmental pollution problem of residual concrete is becoming prominent today when environmental protection is more and more popular. If the waste concrete of concrete batching plant was recycled and reused, then it will take benefits to both market and people.

Protection environment, saving energy and reducing emission is not only the national policy, but also is obligation to enterprises to fulfill.

To concrete batching plant manufacturers, they not only should produce concrete mixing equipments, but also have devices to deal with residue. Concrete batching plant manufacturers should improve the utilization rate of raw material and strengthen environmental protection consciousness.

To concrete batching plant equipments users, they should also have the awareness to make pollutionprevention measures

Our main products are as follows:

Concrete batching plant (HZS25 / HZS35 / HZS50 / HZS60 / HZS90 / HZS120 / HZS180),JS series twin shaft concrete mixer: (JS500 / JS750 / S1000 / JS1500 / JS2000 / JS3000 / JS4000, small concrete mixers,)Portable concrete mixer(JZC350 / JZM350 / JZC500 / JZM500 / JZC750 / JZM750).
Selling is not the end, but the beginning of the service. About service, we are more attentively; about Quality, we are more reliable; about smile, we are more sincere.

Any question or request in this filed, welcome to contact us freely. We sincerely welcome friends from all walks of life to visit our company and create a glorious tomorrow hand in hand.

 please  view our site：http://www.onway.co

Tags: Concrete Mixer, Mobile concrete mixer, Portable concrete mixer, Small Concrete Mixer

The proper methods of using material hoist

When should you inspect the materials hoists?

1. Schedule a detailed inspection of all hoists.

2. Follow the manufacturers' recommended maintenance schedules.

3. Inspect hooks, ropes, brakes and limit switches for wear and damage every working day.

4. Replace items not operating properly. Tag defective items and remove from service for repair by 

a competent person.

5. Post the safe load limit on the hoist.

6. Inspect the hoist before lifting a load. Check the upper and lower hooks to see that they swivel. 

Replace any worn chain or wire rope immediately. Tag any defective chain or rope and remove 

from service.

7.Keep wire ropes and chains lubricated.

How should you use a materials hoist safely?

1. Hoist from directly over the load. If not centered, the load may swing when lifted.

2. Hang hoists solidly in the highest part of the hook area. Rigged this way, the hook support is 

directly in line with the hook shank

3. Lever operated hoists can be used to pull in any direction, but a straight line pull must be

 maintained. Side pulling or lifting increases wear and sets up dangerous stress levels on hoist 

parts. Only one person should pull on hand, chain and lever hoists.

4. When loading the lower hook, place the load directly in line with the hook shank. 

5. Loaded this way, the load chain makes a straight line from hook shank to hook shank.

What should you avoid when using material hoists?

1. Do not use hoisting equipment for lifting people.

2. Do not pass a load over workers.

3. Do not tip a load. The load is unstable and harms the hook and hoist.

4. Do not insert the point of the hook in a link of the chain.

5. Do not hammer a sling into place.

6. Do not leave slings dangling from the load hook. Place sling hooks on the sling ring when 

carrying slings to the load.

7. Do not raise loads higher than necessary to clear objects.

8. Do not exceed a hoist load limit.

9. Do not leave suspended loads unattended.

Our main products are as follows:

Concrete batching plant (HZS25 / HZS35 / HZS50 / HZS60 / HZS90 / HZS120 / HZS180),JS series twin shaft concrete mixer: (JS500 / JS750 / S1000 / JS1500 / JS2000 / JS3000 / JS4000, small concrete mixers,)Portable concrete mixer(JZC350 / JZM350 / JZC500 / JZM500 / JZC750 / JZM750).
Selling is not the end, but the beginning of the service. About service, we are more attentively; about Quality, we are more reliable; about smile, we are more sincere.

Any question or request in this filed, welcome to contact us freely. We sincerely welcome friends from all walks of life to visit our company and create a glorious tomorrow hand in hand.

 please  view our site：http://www.onway.co

How to maintain the concrete mixer of a concrete batching plant?

Concrete mixer is core part of concrete batching plant. Whether it can work well or not greatly relates to 

the working condition of the whole concrete batching plant. We should pay attention on the following tips

 when checking the concrete mixer. 

1. Items that should be checked before putting into use:

a. Check whether the machine is stable or not;

b. Make sure whether the blades and the binder bolts are solid or not;

c. Examine the binder bolts of feeding frame;

d. Confirm the water is ample and the pipeline is unobstructed.

2. Items that should be checked after using

a. Remove the soot deposit inside and outside the agitator, the discharge door and the hopper. Then flush 

them with water;

b. There should not be any other things in the hopper;

c. Cut off the power and lock the control system well;

d. Lubricate some parts according to the condition of the machine;

e. Drain off the water of water supply system.

3. Items that should be checked weekly

a. Check the damage of steel wire rope and apply some lubrication oil or replace new rope according to

 degree of wear.

b. Examine reducer, oil pump and lubricate parts.

c. Water supply system should keep clean so as not to block up; check and clean suction valve once.

d. Make sure the rocking arm position switch is tightened.

e. Confirm the blades and the binder bolts are not loose. The maximum interval between blades and drum 

should be 5mm.

f. Check the contactor of electric box.

4. Items that should be checked regularly

a. Check the hoisting system and adjust it properly.

b. Examine water pump and restrictor valve to make sure there is no water leakage.

c. Inspect gearwheel and lubricate appropriately. Adjust the degree of tightness of belt.

d. Check degree of wear of blades and lining plate and replace them in time.

Our main products are as follows:

Concrete batching plant (HZS25 / HZS35 / HZS50 / HZS60 / HZS90 / HZS120 / HZS180),JS series twin shaft concrete mixer: (JS500 / JS750 / S1000 / JS1500 / JS2000 / JS3000 / JS4000, small concrete mixers,)Portable concrete mixer(JZC350 / JZM350 / JZC500 / JZM500 / JZC750 / JZM750).

Concrete Batching Plant structure Concrete Batching Plant is a device that combines various ingredients to form concrete. Next, we will briefly introduce concrete batching plant in terms of its components. A concrete batching plant is mainly consisted of mixing system, material weighing system, material handling system, material storage system, control system and other ancillary facilities. 1. Mixing system Mixing system mainly refers to concrete mixer. It can be divided into forced type concrete mixer and self-loading concrete mixer according to its way of mixing concrete. Forced type concrete mixer can mix various kinds of concrete, such as flow concrete, dry concrete, and plasticity concrete and so on. It is very popular at home and abroad. While, self-loading concrete mixer is mainly used to mix flow concrete. Therefore, it is rarely used at present. 2. Material weighing system Material weighing system is the key component which greatly affects the quality and production cost of concrete. It is composed of aggregate weighing, water weighing and addictive weighing. In general, a concrete batching plant with productivity ≦20m3 will adopt stacking weighing. However, a concrete batching plant with productivity ≧50m3 mainly adopts segregation weighing system. 3. Material handling system Material handling system is made up of three parts: 3.1 aggregate delivery system There are two ways of delivery. One is skip type and the other is belt type. The merits of hopper lifting is little floor space and simple structure. Belt conveyer system has the advantage of high efficiency and low failure. 3.2 water and additive delivery The delivery of them is finished by water pump. 4. Material storage system Aggregate material is usually left in open air. Powder material is stored in cement silo. Additive is stored in a steel structured volume. 5. Control system Control system is the most important part of the whole devices. In general, the control system of small batching plant is simple while control system of large concrete batching plant is more complex. Onway MACHINERY specializes in manufacturing concrete batching plant, concrete mixer, etc. Our main products are as follows: Concrete batching plant (HZS25 / HZS35 / HZS50 / HZS60 / HZS90 / HZS120 / HZS180), JS series twin shaft concrete mixer: (JS500 / JS750 / S1000 / JS1500 / JS2000 / JS3000 / JS4000, small concrete mixers,) Portable concrete mixer(JZC350 / JZM350 / JZC500 / JZM500 / JZC750 / JZM750). Selling is not the end, but the beginning of the service. About service, we are more attentively; about Quality, we are more reliable; about smile, we are more sincere. Any question or request in this filed, welcome to contact us freely. We sincerely welcome friends from all walks of life to visit our company and create a glorious tomorrow hand in hand. please view our site：http://www.onway.co Tags: Concrete Mixer, Mobile concrete mixer, Portable concrete mixer, Small Concrete Mixer

Concrete Batching Plant structure

Concrete Batching Plant is a device that combines various ingredients to form concrete.
Next, we will briefly introduce concrete batching plant in terms of its components.
A concrete batching plant is mainly consisted of mixing system, material weighing system,
material handling system, material storage system, control system and other ancillary facilities.

1. Mixing system
Mixing system mainly refers to concrete mixer. It can be divided into
forced type concrete mixer and self-loading concrete mixer according to its way of mixing concrete.
Forced type concrete mixer can mix various kinds of concrete, such as flow concrete,
dry concrete, and plasticity concrete and so on. It is very popular at home and abroad. While, self-loading concrete mixer is mainly used to mix flow concrete. Therefore, it is rarely used at present.
2. Material weighing system
Material weighing system is the key component which greatly affects the quality and production cost of concrete.
It is composed of aggregate weighing, water weighing and addictive weighing. In general,
a concrete batching plant with productivity ≦20m3 will adopt stacking weighing.
However, a concrete batching plant with productivity ≧50m3 mainly adopts segregation weighing system.
3. Material handling system
Material handling system is made up of three parts:
3.1 aggregate delivery system
There are two ways of delivery. One is skip type and the other is belt type. The merits of hopper lifting is
little floor space and simple structure. Belt conveyer system has the advantage of high efficiency
and low failure.
3.2 water and additive delivery
The delivery of them is finished by water pump.
4. Material storage system
Aggregate material is usually left in open air. Powder material is stored in cement silo. Additive is
stored in a steel structured volume.
5. Control system
Control system is the most important part of the whole devices. In general, the control system of small
batching plant is simple while control system of large concrete batching plant is more complex.

Onway MACHINERY specializes in manufacturing concrete batching plant, concrete mixer, etc.
Our main products are as follows:
Concrete batching plant (HZS25 / HZS35 / HZS50 / HZS60 / HZS90 / HZS120 / HZS180),
JS series twin shaft concrete mixer:
(JS500 / JS750 / S1000 / JS1500 / JS2000 / JS3000 / JS4000, small concrete mixers,)
Portable concrete mixer(JZC350 / JZM350 / JZC500 / JZM500 / JZC750 / JZM750).
Selling is not the end, but the beginning of the service. About service, we are more attentively; about Quality,
we are more reliable; about smile, we are more sincere.
Any question or request in this filed, welcome to contact us freely.
We sincerely welcome friends from all walks of life to visit our company and create a glorious tomorrow
hand in hand.
please  view our site：http://www.onway.co
Tags: Concrete Mixer, Mobile concrete mixer, Portable concrete mixer, Small Concrete Mixer